Composer, electronic musician, improviser

ejecting media from iMac with no manual eject mechanism

It’s happened to us all: we get that new broken iMac and can’t wait to pop a system disc or new OS disc in and make ‘er all better.  Then, the unthinkable happens: nothing!  No new OS, no ability to boot from disc, and worst of all, the deeeesk — she no come out!

There is a relatively well-known, but somewhat obscure fix for this: simply power down the machine and power it back up again while holding down the mouse-button (that’s left button for 2 button meeces) until the disc ejects.  

On rare occasion, this will fail, sometimes due to firmware corruption, sometimes due to hardware failure.  If the drive is toast, then I’m afraid you will have to remove the drive and pop ‘er open to get that disc back!  However, if the drive worked on the way in (accepted the disc and spun it about a bit) chances are it will work on the way out.  A solution I arrived at yesterday was to power the affected machine up in Target mode.  If the machine is firmware protected, which prevents you from using key commands at boot, you will have to reset the firmware password.  See my earlier post about that.

  1. connect the affected machine to another mac with a firewire cable.
  2. start the machine in target mode by holding down ‘T’ until the screen goes blue with a yellow firewire symbol bouncing around. 
  3. the hard disk and your cd/dvd will appear as mounted drives on the desktop or volumes directory of the mac you connected it to.  simply select the disc, cd or dvd, and right click or control click it and select ‘eject.’ 

In my case, the disc popped right out, and I was able to bash the offending iMac to bits without destroying my precious Official Apple Leopard 10.5.6 disc.

If you have a different experience, or would like to contribute another possible fix, please leave a comment below and I can later edit it into this post.


Filed under: Miscellany

Reset Open Firmware by removing ALL RAM

WARNING: I will not be held responsible for anything you do to your computer.  Please follow any of the below instructions at your own risk.  Be sure to always follow Apple DIY Hardware Replacement instructions (you can download these for any model in pdf format), use official Apple parts, and use anti-static discharge kits and the proper tools, do not steal or commit adultary (on purpose), make sure to feed your pets, and love Our Beloved Leader Barack Obama with all your hearts, minds, and souls.


I know everyone is just hungering for this solution, especially since Intel Macs after a certain date do not even use Open Firmware (they use a firmware protection called Extensible Firmware Interface (EFI) technology)… however, for those 3 of you who have picked up old PPC macs that you desperately want to defile and warp to your nefarious purposes, but cannot because of open firmware restrictions (not letting you netboot, or boot from CD, or use any sort of keyboard boot options), even with the old ” remove the RAM and reset PRAM” trick, this post may be just what you are looking for!

CASE: iMac G5 (flat panel) has open firmware that does not allow keyboard boot commands.  Additionally, the machine is set to Net Boot, so at boot, there is blue globe, followed by a sad folder with a question mark (“where’s my net boot friend” it screams!)

OLD SOLUTION: Open Firmware can usually be reset by removing a stick of RAM and resetting the PRAM: remove the RAM (after unplugging the machine!), close all bits up again, and start the machine – at the chime, hold down apple(command)+option+p+r.  You will hear another chime – hold for three total chimes, then let the thing go.  This will reset the open firmware password, effectively removing the password protection.

This can sometimes fail, however, as it did for me in the case above.  I cannot say exactly why, but the following DID remove the password protection.

SOLUTION: remove ALL RAM from the machine.  In this case, the iMac G5 has parallel RAM slots, both easily accessible and both accepting the same RAM quantities.  I first started the machine, let it try to netboot,and stuck in my official Leopard Install DVD (purchased from Apple :D) which it gladly accepted.  I then powered off the machine.  I unplugged it, removed both RAM sticks, popped the back on, and started her up.  Instead of hearing the usual happy apple startup chime that we all love, a heard a frantic and death-signalling beep.  Having no RAM at all makes for sad macs!  No key combos work, no graphic interface, nothing: a Formless Void…  So I unplugged the machine, popped the RAM back in (swapping the two sticks which were botht the same kind — 512 ), plugged and powered it on.  Upon hearing the chime (return joyous happy chime!), I held down the PRAM reset command above (apple(command)+option+p+r), for two chimes.  Immediately after the second chime, I released the PRAM reset keys and held down c to boot from CD (in this case, DVD) and viole,  triomphe!

With some models you may not be able to get at all of the RAM: such is the case with the snoball, for example.  Try the above removing all the RAM you can.  In a worst-case scenario, all solutions will fail, and to boot (sorry!) your disc is stuck in the machine and hitting eject will not spit it out… :'(  Hold the mouse button on startup to eject the disc… at least you have that back now!

If you have other solutions that worked for you, post ’em below!

Filed under: Miscellany, , , , , , , , ,

G O I N G S O N : L O C A L (ISH)

fritz Art of Fritz Horstman
kane Music of Brian Kane
fritz Hartford Phase Shift
fritz Hartford Sound Alliance
Lique Art of Philip Lique
Lique Music of Matt Sargeant
strycharz Art of Heather Strycharz
uncertainty Uncertainty Music Series

My Other Awesome Sites [•_•]

Assault! 375 Aural Assaults!
About me! About me!
MySpace! MySpace!
Google+! Google+!
My (soon-to-be) Company! My (soon-to-be) Company!

Enter your email address to subscribe to this awesome blog and receive notifications of new posts by email!

Join 81 other followers


P O S T E R S !







INI new haven

Handmade instruments by Scott Petersen and Brian Kane at Artspace New Haven